Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 9

Smooth Copper Carved Credenza – Fleur de Lis, Paul Mathieu

$21,703per item
£16,455.01per item
€19,210.45per item
CA$31,033.17per item
A$31,511.64per item
CHF 17,988.53per item
MX$380,764.47per item
NOK 211,304.64per item
SEK 210,728.12per item
DKK 143,613.49per item
Quantity

About the Item

The Fleur de Lis Credenza in Smooth Copper is 78 inches wide and 34 inches tall, the Fleur de Lis carving covering the full front, sides, and top in Smooth Copper metal. The repeating heraldic lily pattern is carved into solid teak before the Smooth Copper cladding is pressed into the relief. Six cabriole legs carry the serpentine front. Four cupboard doors on the outer sections and three central drawers sit within the front, the carving continuing across each panel without interruption. The teak is carved to the Fleur de Lis pattern before Smooth Copper metal is hand-fitted to every surface. The carved relief requires careful fitting across the full 78-inch serpentine width; each section is secured with flush-set nails. Interior: teak veneer with adjustable shelving. Measures 78 by 18 by 34 inches. Four cupboard sections with shelves and three central drawers. Works as a credenza, sideboard, buffet, or dining storage piece. Available in smooth finish across all four metals. Custom sizing available. Made entirely to order. Designed by Paul Mathieu for Stephanie Odegard Collection. The Fleur de Lis Credenza takes Paul Mathieu's Louise credenza form and adds the heraldic lily carving that defines the carved pieces of the Louise series. The Fleur de Lis motif connects the piece to both European decorative tradition and the carving craft of Rajasthan's workshops. Produced in Udaipur. Made to order, each piece may show slight variations that are a natural result of handmade metal-clad production. The Smooth Copper surface will gradually mellow in tone over time, which is part of the material's natural character. The images shown in this listing may be photographed in different lighting conditions or may include 3D illustrations created to represent the available finishes. We warmly encourage customers to request an individual sample or a complete sample set of all twelve finishes to experience the surface, tone, and character firsthand. Please note that moisture in the air, seasonal climate shifts, and the natural movement of wood over time may cause the metal surface to develop slight wrinkles or occasional bubbling. We use well-seasoned reclaimed teak and high-quality marine-grade MDF wherever technically possible to minimise these natural effects, but complete stability of metal cannot be guaranteed. All smooth finishes will show subtle tool marks. These are not defects but a natural and unavoidable result of hand-working and hand-polishing metal sheets. Our hammered finishes are recommended where a more textured, forgiving surface is preferred. None of our metal-clad pieces are sealed with a permanent protective coating. This allows the metal to age naturally and beautifully over time. We polish every piece carefully before packing. A clear PU coat can be applied on request. The antiqued white bronze finish will react with natural elements the fastest in the beginning, but it too will stop reacting and settle into a stable state like copper after 6-12 months. Since it is already antiqued and looks intentionally tarnished, this early reaction does not change the overall appearance. In that way, this surface is the most forgiving. The antiqued white bronze finish is done by applying an acidic chemical over the white bronze to recreate a natural patination. Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed. The goal of this finish is to achieve rainbow-like tones with dull, shiny, cloudy, and lightly streaked patches to give an illusion of antiquing. As a default practice, we offer a protective wipe-on PU coat only on this finish. If a designer prefers the natural, uncoated aging, we can leave it untreated just like the other finishes. A PU coat helps keep the surface looking the same as when shipped, but it does not create a fully uniform patina; natural variation will always remain part of this finish.
  • Creator:
  • Dimensions:
    Height: 34 in (86.36 cm)Width: 78 in (198.12 cm)Depth: 18 in (45.72 cm)
  • Style:
    Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2025
  • Production Type:
    New & Custom(Current Production)
  • Estimated Production Time:
    11-12 weeks
  • Condition:
  • Seller Location:
    New York, NY
  • Reference Number:
    Seller: LFLDC-CU-SM-0091stDibs: LU4236150015732

More From This Seller

View All
Collectible Smooth Copper Fleur de Lis Credenza – Paul Mathieu

Collectible Smooth Copper Fleur de Lis Credenza – Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Fleur de Lis Credenza in Smooth Copper is a Louis XV credenza form covered in a carved heraldic surface: six cabriole legs, a serpentine front in Smooth Copper metal, four cupboa...

Category

21st Century and Contemporary Indian Modern Credenzas

Materials

Copper, Sheet Metal

Smooth Copper Fleur de Lis Sideboard – Carved Credenza, Paul Mathieu

Smooth Copper Fleur de Lis Sideboard – Carved Credenza, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Fleur de Lis Credenza in Smooth Copper is 78 inches of carved heraldic surface on the Louise form. The Fleur de Lis pattern covers the front, sides, and top continuously; four cu...

Category

21st Century and Contemporary Indian Modern Sideboards

Materials

Copper, Sheet Metal

Smooth Copper Fleur de Lis Credenza – Cabriole Leg Sideboard

Smooth Copper Fleur de Lis Credenza – Cabriole Leg Sideboard

By Paul Mathieu (French)

Located in New York, NY

The Fleur de Lis Credenza in Smooth Copper is the Louise credenza form covered in the Fleur de Lis carving: six cabriole legs carrying a serpentine front in Smooth Copper metal, four...

Category

21st Century and Contemporary Indian Modern Credenzas

Materials

Copper, Sheet Metal

Smooth Copper Fleur de Lis Credenza – Carved Buffet, Paul Mathieu

Smooth Copper Fleur de Lis Credenza – Carved Buffet, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

Four cupboard doors, three central drawers, six cabriole legs, and the Fleur de Lis carving covering the full front, sides, and top: the Fleur de Lis Credenza is 78 inches of carved ...

Category

21st Century and Contemporary Indian Modern Sideboards

Materials

Copper, Sheet Metal

Smooth Copper Fleur de Lis Credenza – Louise Carved, Paul Mathieu

Smooth Copper Fleur de Lis Credenza – Louise Carved, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Fleur de Lis Credenza in Smooth Copper is 78 inches of carved Smooth Copper metal on six cabriole legs, the Fleur de Lis pattern repeating across the full front, sides, and top. ...

Category

21st Century and Contemporary Indian Hollywood Regency Credenzas

Materials

Copper, Sheet Metal

Hollywood Regency Smooth Copper Fleur de Lis Credenza

Hollywood Regency Smooth Copper Fleur de Lis Credenza

By Paul Mathieu (French)

Located in New York, NY

The Fleur de Lis Credenza in Smooth Copper is 78 inches wide on six cabriole legs, the Fleur de Lis carving covering every exterior surface in Smooth Copper metal, four cupboard door...

Category

21st Century and Contemporary Indian Hollywood Regency Credenzas

Materials

Copper, Sheet Metal

You May Also Like

Contemporary Repoussé Copper Feather Design 4 Door Buffet by Robert Kuo

Contemporary Repoussé Copper Feather Design 4 Door Buffet by Robert Kuo

By Robert Kuo

Located in Los Angeles, CA

Feather Design 4 Door Buffet Antiqued Copper Hand Repoussé Elm Wood Lacquered 3 Drawers 2 Shelves (Removable) Touch Latch Limited Edition Each piece is individually crafted and is un...

Category

2010s Credenzas

Materials

Copper

Paul Evans for Directional Mid Century Copper Pewter Bronze Patchwork Credenza

Paul Evans for Directional Mid Century Copper Pewter Bronze Patchwork Credenza

By Paul Evans, Directional

Located in Franklin Park, IL

Paul Evans for Directional Mid Century Copper, Pewter and Bronze Patchwork Credenza This credenza measures: 72.25 wide x 18.25 deep x 32.25 inches high Excellent Vintage Condition....

Category

Mid-20th Century American Mid-Century Modern Credenzas

Materials

Bronze, Copper, Pewter

Brutalist Sculptural Copper Floral Sideboard in Burnished Steel, Egg Designs

Brutalist Sculptural Copper Floral Sideboard in Burnished Steel, Egg Designs

By Egg Designs

Located in Bothas Hill, KZN

Boldly sculptural and richly ornamental, this Brutalist sideboard by Egg Designs transforms functional storage into a collectible art piece. Inspired by the contrast between industrial architecture and romantic botanical forms, the cabinet is enveloped in hand-formed copper flowers that create a dramatic three-dimensional surface across every elevation. The exterior is clad in burnished steel...

Category

2010s South African Modern Sideboards

Materials

Steel

Mastercraft Sideboard in Brass Decorated Burled Elm

Mastercraft Sideboard in Brass Decorated Burled Elm

By William Doezema, Mastercraft

Located in Hanover, MA

Mastercraft sideboard cabinet of drawers made from beautifully figured Carpathian elm with decorative brass appliques on three doors and brass trim around the outer edges. The door ...

Category

Vintage 1970s American Hollywood Regency Credenzas

Materials

Brass

Art Nouveau Credenza with Brass Details

Art Nouveau Credenza with Brass Details

Located in Wien, AT

This exceptional Art Nouveau vitrine embodies masterful craftsmanship and timeless elegance. The slender black wooden frame exudes a refined aesthetic, while the four glass doors fea...

Category

20th Century Austrian Jugendstil Sideboards

Materials

Brass

Copper and Burnished Steel, Contemporary Grande Rosette Sideboard by Egg Designs

Copper and Burnished Steel, Contemporary Grande Rosette Sideboard by Egg Designs

By Egg Designs

Located in Bothas Hill, KZN

The Rosette sideboard belongs to the Rosette collection designed by Egg Designs and manufactured in South Africa. This high end, contemporary and bespoke server is covered with a ri...

Category

2010s South African Modern Sideboards

Materials

Steel