Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 10

Art Deco Smooth Copper Demi Console Table – Paul Mathieu

$4,457per item
£3,371.88per item
€3,940.66per item
CA$6,378.92per item
A$6,481.52per item
CHF 3,671.94per item
MX$78,864.16per item
NOK 43,056.95per item
SEK 43,291.53per item
DKK 29,478.40per item
Quantity

About the Item

The Louise Demi Console Table in Smooth Copper is a wall table in the demi-lune tradition: half-moon top, flat back, three cabriole legs carrying the piece at 30 inches. The flat back edge is fully clad in Smooth Copper metal like every other surface. The front presents the curved half-moon top and the three Smooth Copper cabriole legs — the centre leg below the apex of the curve, the two outer legs at the back corners. The serpentine apron curves between them. The teak structure is built to the half-moon form before Smooth Copper metal is hand-fitted to every surface. The three cabriole legs are covered in Smooth Copper on the full S-curve without visible join; the curved top and apron are fitted separately and secured with flush-set nails. The flat back edge is fitted in the same Smooth Copper metal as the front. Measures 31 by 15.5 by 30 inches. Works as an entry table, hall table, or demi-lune console. The shallow depth suits tight corridors and narrow entry halls. Available in all twelve standard finishes. Custom sizing available. Made entirely to order. Designed by Paul Mathieu for Stephanie Odegard Collection. The demi-lune table form has been a feature of classical French interior design since the Louis XV period. Paul Mathieu's version takes the cabriole leg of that period and places it on the most practical of its traditional forms. Produced in Udaipur. Made to order, each piece may show slight variations that are a natural result of handmade metal-clad production. The Smooth Copper surface will gradually mellow in tone over time, which is part of the material's natural character. The images shown in this listing may be photographed in different lighting conditions or may include 3D illustrations created to represent the available finishes. We warmly encourage customers to request an individual sample or a complete sample set of all twelve finishes to experience the surface, tone, and character firsthand. Please note that moisture in the air, seasonal climate shifts, and the natural movement of wood over time may cause the metal surface to develop slight wrinkles or occasional bubbling. We use well-seasoned reclaimed teak and high-quality marine-grade MDF wherever technically possible to minimise these natural effects, but complete stability of metal cannot be guaranteed. All smooth finishes will show subtle tool marks. These are not defects but a natural and unavoidable result of hand-working and hand-polishing metal sheets. Our hammered finishes are recommended where a more textured, forgiving surface is preferred. None of our metal-clad pieces are sealed with a permanent protective coating. This allows the metal to age naturally and beautifully over time. We polish every piece carefully before packing. A clear PU coat can be applied on request. The antiqued white bronze finish will react with natural elements the fastest in the beginning, but it too will stop reacting and settle into a stable state like copper after 6-12 months. Since it is already antiqued and looks intentionally tarnished, this early reaction does not change the overall appearance. In that way, this surface is the most forgiving. The antiqued white bronze finish is done by applying an acidic chemical over the white bronze to recreate a natural patination. Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed. The goal of this finish is to achieve rainbow-like tones with dull, shiny, cloudy, and lightly streaked patches to give an illusion of antiquing. As a default practice, we offer a protective wipe-on PU coat only on this finish. If a designer prefers the natural, uncoated aging, we can leave it untreated just like the other finishes. A PU coat helps keep the surface looking the same as when shipped, but it does not create a fully uniform patina; natural variation will always remain part of this finish.
  • Creator:
  • Dimensions:
    Height: 30 in (76.2 cm)Width: 31 in (78.74 cm)Depth: 15.5 in (39.37 cm)
  • Style:
    Art Deco (In the Style Of)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2025
  • Production Type:
    New & Custom(Current Production)
  • Estimated Production Time:
    11-12 weeks
  • Condition:
  • Seller Location:
    New York, NY
  • Reference Number:
    Seller: LDCT-CU-SM-0031stDibs: LU4236149998662

More From This Seller

View All
Smooth Copper Demi Console Table – Louise Cabriole Leg

Smooth Copper Demi Console Table – Louise Cabriole Leg

By Paul Mathieu (French)

Located in New York, NY

Three cabriole legs in Smooth Copper metal carry a half-moon top at 30 inches. The flat back edge of the Louise Demi Console Table sits flush against the wall; the curved front edge ...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Copper, Sheet Metal

Smooth Copper Demi Lune Console Table – Louise Cabriole Leg

Smooth Copper Demi Lune Console Table – Louise Cabriole Leg

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Copper has a half-moon top, flat at the back and curved at the front, on three cabriole legs in Smooth Copper metal. The flat back edge sits f...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Copper, Sheet Metal

Hollywood Regency Smooth Copper Demi Console – Paul Mathieu

Hollywood Regency Smooth Copper Demi Console – Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Copper is 31 inches wide and 15.5 inches deep, with a half-moon top — flat back against the wall, curved front projecting into the room. Three...

Category

21st Century and Contemporary Indian Hollywood Regency Console Tables

Materials

Copper, Sheet Metal

Smooth Copper Louise Demi Console Table – Half Moon, Paul Mathieu

Smooth Copper Louise Demi Console Table – Half Moon, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table has a half-moon top: a flat edge at the back that sits flush against the wall, and a curved front edge that projects into the room. Three cabriole legs ...

Category

21st Century and Contemporary Indian Louis XV Console Tables

Materials

Copper, Sheet Metal

Art Deco Smooth Brass Demi Console Table – Paul Mathieu

Art Deco Smooth Brass Demi Console Table – Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Brass is a wall table in the demi-lune tradition: half-moon top, flat back, three cabriole legs carrying the piece at 30 inches. The flat back...

Category

21st Century and Contemporary Indian Art Deco Console Tables

Materials

Brass, Sheet Metal

Smooth Copper Louise Demi Console – Half Moon Entry Table

Smooth Copper Louise Demi Console – Half Moon Entry Table

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth Copper is a half-moon entry table: three cabriole legs, a curved front edge, a flat back that sits against the wall. All surfaces clad in Smoo...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Copper, Sheet Metal

You May Also Like

French Art Deco Hand Hammered Copper & Bronze Console / Center Table, Paul Kiss

French Art Deco Hand Hammered Copper & Bronze Console / Center Table, Paul Kiss

By Paul Kiss

Located in New York, NY

An important and rare French Art Deco / Early Mid-Century Modern three legged center table, gueridon, side table, sofa table or console in hand-hammered bronze, copper and iron attributed to Paul Kiss. The table is unique in its ground breaking 3 leg form and broken lines in its leg profiles. The top is delicately hand hammered. Overall, it is an original composition and an exquisite work of art. Two matching three legged consoles...

Category

Mid-20th Century French Art Deco Center Tables

Materials

Bronze, Copper

Fine Mid Century Modern Italian Brass Nickel Console Table L'Angolo Metallarte

Fine Mid Century Modern Italian Brass Nickel Console Table L'Angolo Metallarte

By L'Angolo Metallarte

Located in Roslyn, NY

Fine Mid Century Modern Italian Brass Nickel Console Table L'Angolo Metallarte. An Italian console by L'Angolo Metallarte, Rome, a rare find entirely handmade with wooden structure,...

Category

20th Century Art Deco Console Tables

Materials

Brass, Nickel

Quartz Side Table with Bronze-Patina Brass Inlay by R&Y Augousti

Quartz Side Table with Bronze-Patina Brass Inlay by R&Y Augousti

By R & Y Augousti

Located in New York, NY

The Paris based label has distinguished themselves since their launch, with their iconic use of shagreen mixed with brass and other exotic materials. All furniture is handcrafted by ...

Category

21st Century and Contemporary Philippine Art Deco Nesting Tables and Sta...

Materials

Quartz, Brass

French Art Deco Console Table by Raymond Subes

French Art Deco Console Table by Raymond Subes

By Raymond Subes

Located in Houston, TX

French Art Deco bronze, steel and wood console with black glass top by Raymond Subes, circa 1925.

Category

Vintage 1920s French Art Deco Console Tables

Materials

Bronze, Steel

French Art Deco Console with Mirror Attributed to Raymond Subes

French Art Deco Console with Mirror Attributed to Raymond Subes

By Raymond Subes

Located in Bridgewater, CT

A French Art Deco console table attributed to Raymond Subes, with scrolling leg and portoro gold marble top, together with a tall piriform beveled mirror, created circa 1930s.

Category

Vintage 1930s French Art Deco Console Tables

Materials

Marble, Iron