Aluminum Shelves and Wall Cabinets

An open, wall-mounted shelf designed for the storage and display of everyday objects. Crafted from raw aluminum plate and solid oak brackets, its simplistic design and utilitarian lo...

Wir bieten ein wunderschönes Design Wandregal vom Schweizer Traditionshersteller Vitsoe zum Verkauf an. Das Regalsytem wurde von Dieter Rams, einem der bekanntesten Möbeldesigner des...

The Minimalist wall-mounted 4G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily ...

An Italian Space Age wall unit. Laminate blue faux bois with black lacquer, glass and aluminum details. A diverse storage piece allowing for use as a bookshelf, bar unit or media cab...

The Minimalist wall-mounted G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum with two Minimalist pin-hinged doors. Each shelf has an inset welded U-channel that spans...

Wir bieten ein wunderschönes Design Wandregal vom Schweizer Traditionshersteller Vitsoe zum Verkauf an. Das Regalsytem wurde von Dieter Rams, einem der bekanntesten Möbeldesigner des...

Osvaldo Borsani for Tecno, bookcase or wall unit, model 'E22', lacquered steel, lacquered aluminum, wood, glass, Italy, design 1957. This sleek, wall-mounted shelving unit, crafted ...

Quarter-inch waxed aluminum plate. Two pin-hinged doors integrated flush to the face. Inset welded U- channel mount on custom-bent steel Z-clips. The OG is a single-bay configuratio...

Quarter-inch welded aluminum plate, polished and waxed. Freestanding. Designed to display objects and books and to function as a room divider — a freestanding shelf with structural ...

Wir bieten ein wunderschönes modulares Wandregalsystem von Vitsoe aus den 1960er Jahren zum Verkauf an. Das Design stammt von Dieter Rams, einem der einflussreichsten Möbeldesigner d...

Set of three Karl Springer style aluminum & brass wall shelves comprising of tubular T forms with brass end caps at the fore ends, and slots at the interior for supporting shelves. ...

Quarter-inch aluminum plate, brushed and anodized. Four bays with integrated pin-hinged doors, flush to the face. Inset bolted U-channel mount on custom-bent steel Z-clips. The anod...

The wall-mounted, tidal shelf is formed out of 1/4 inch thick, powder-coated aluminum. Each shelf has a welded U-channel to the reverse of the shelf and ea...

An unusual and rare wall mounted vanity from the 1964 Herman Miller accessory line to the CSS storage system. A collaborative design by Alexander Girard...

Korpus is a colourful wall-mounted shelf created for HAY by Norwegian product designer Andreas Bergsaker. Based on the desire to create a durable multi-purpose shelf from recyclable material, Korpus Shelf...

Quarter-inch aluminum plate, digitally cut and hand-finished. Three pin-hinged doors integrated flush to the face — no visible hardware. Inset welded U- channel mount on custom-bent...

This Omni shelving system by George Nelson redefines modular display with architectural finesse and mid-century innovation. The shelving unit is supported by slender, spring-loaded t...

The Minimalist wall-mounted, 54" wide, 3G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf ...

Quarter-inch aluminum plate throughout. Custom integrated hinge aligned to the interior — doors read as continuous planes when closed, hardware entirely concealed. Originally commis...

Quarter-inch waxed aluminum plate. Two drawers with underside Blum motion soft-close glides. Each drawer interior lined in 10-ounce natural canvas. Inset welded U-channel mount. Dra...

The Minimalist wall-mounted, 37" wide, 3G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily mounts on included custom-bent steel Z-clips. Each bay of this modernist shelf...

The Minimalist wall-mounted, 91 wide, 5G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily mounts on included custom-bent steel Z-clips. Each bay of this modernist shelf...

Three-eighths inch aluminum plate, machine cut. Hand-finished and waxed. Doors with custom integrated hinge aligned to the interior surface — no visible hardware on the face when clo...

Three-eighths inch aluminum plate, machine cut. Each element hand-finished, waxed, and bolted together with recessed stainless steel hardware. Underside carries signed label. Design...

An open, wall-mounted shelf designed for the storage and display of everyday objects. Crafted from thick raw aluminium plate and breech wood brackets with water-based charcoal black ...

This is a nine bay Barzilay wall unit by Gerald McCabe of Los Angeles. Oiled walnut with aluminum detail in great condition. We have a variety of ca...

The wall-mounted, Minimalist Shelf is sculpted out of 1/4 inch thick, wax-polished aluminium. Each shelf has an inset welded U-channel that spans the ...

We have over 50 pieces of this amazing Barzilay walnut wall unit with aluminum accents. Please contact us for custom pricing and visit our L...

Three-eighths inch waxed aluminum plate, 95.5 inches wide. Inset welded U-channel mount on custom-bent steel Z-clips. Proportioned specifically for 12-inch vinyl record storage — de...

The wall-mounted, Minimalist 6G Shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the shelf and easily...

Shigeru Uchida floating aluminum wall cabinets with sliding doors. Pastoe, Netherlands. Three available, priced separately. Measurements: 35.5” width, 7.25” depth, 10.5” height (e...

Wall shelves 1950s Rare piece of craftsmanship with great finish from every angle. Aluminim frame makes it float and has a nice finish with thin stripes of hard wood inserted in pi...

Versatile freestanding wall-unit/bookcase in oak, walnut, and pine with aluminum, steel, and brass accents by Jitona (1968, Lomnice nad Lužnicí, Czechoslovakia). Five bays can be assembled in total if all pieces are utilized together - seven pine rails, three long shelves, three long cabinets (including one that is half drawers/half open storage), three long glass fronted cabinets, two shorter cabinets, three shorter glass fronted cabinets, and one drop-down cabinet/bar with glass shelves. All cabinet shelves are removable, though not adjustable. Feet for the cabinets and rails are all adjustable, and the disks on the rails offer stability and protection to both floors and ceilings when adjustments are made. The longer pieces displayed as the three bay unit are all 35.25" long, while the shorter pieces displayed as the two bay unit are all 29.5" L. The configuration options for this highly functional unit are limitless. The bar cabinet, five-drawer walnut chest, glass-fronted cabinets, door-fronted cabinets, and two shelves can be custom-assembled based on requirements/aesthetic preference; the shorter pieces just need to be arranged within the same two bays. The legs for all cabinets can be removed, though, depending on the heft of the items displayed/stored, wall-mounting might be required if the weight is too great for the rails alone to adequately support. The 29.38" high cabinets with legs (if using the legs) must be arranged at the bottom, leaving 64.75" of usable rail height for mounting the other pieces. There are some fleabites to the glass (mostly to the edges concealed by the wooden frame when closed) along with light wear the wood consistent with age/use. Conservatively restored and in very fine, vintage condition. Assembled as a 5-bay unit as shown in the fifth image: Measures: H: 105.38" x L: 171" x D: 16". Assembled as a 3-bay unit with the longer pieces: H: 105.38" x L: 109.63" x D: 16" Assembled as a 2-bay until with the shorter pieces: H: 105.38" x L: 62" x D: 15.63" Each piece of the 3-bay system's measurements - * Two cabinets with doors: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 35.25" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 7.25" / below 8.25" x L: 34" x D: (shelf) 13.25" / lower surface 14.25" * Drawers: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with drawer pls) Interior (each drawer) - H: 2" x L: 15.38" x D: 13.25" * Small cabinet: Exterior - H: 29.38" (with legs) / 18.5" (without) x L: 17.5" x D: 15.75" / 16.75" (with pls) Interior - Height above the shelf: 8.25" / below 8.25" x L: 16" x D: 14.38" * Glass-fronted cabinets: Exterior - H: 24.5" x L: 35.25" x D: 9.75" Interior - Height above the shelf: 11" / below 11.5" x L: 34" x D: (shelf) 8" / lower surface 9" * Three shelves - H: 0.63" x L: 35.25" x D: 9.75" Each piece of the 2-bay system's interior measurements - * Two cabinets with doors: Exterior - H: 29.75" (with legs) / 18.63" (without) x L: 29.5" x D: 15.63" / 16.63" (with drawer pls) Interior - Height above the shelf: 8" / below 8.5" x L: 28" x D: (shelf) 13.13" / lower surface 14.38" * Glass-fronted cabinets: Exterior - H: 24.25" x L: 29.5" x D: 10" Interior - Height above the shelf: 11.13" / below 11.25" x L: 28" x D: (shelf) 7.75" / lower surface 8.13" * Bar cabinet: Exterior - H: 18.25" x L: 29.5" x D: 10" / 25.88" (when open) Interior - Height (excluding shelves): 16.88" x L: (left side) 9" / (right side) 18.5" x D: 7.75" (shelf) Rails alone: H: 105.38" (the height can be adjusted via a rail extender to, which will be included, and can be increased to 108") x L: 0.88" x D: 5" Cabinet legs...

Quarter-inch aluminum plate, brushed and anodized. Three bays. Inset bolted U-channel mount on custom-bent steel Z-clips. A narrower configuration of the G shelf family, proportione...

The Minimalist wall-mounted, 12 foot long, 8G shelf is sculpted out of 1/4 inch thick, wax-polished aluminum. Each shelf has an inset welded U-channel that spans the length of the sh...

Quarter-inch wax-polished aluminum plate. Body welded throughout. Removable interior dividers mechanically fastened — no adhesive, no permanent fixing. Winner of the Wallpaper Desig...

Large modular rosewood bookcase/wall unit by Osvaldo Borsani for Tecno (ca. 1960, Italy). Composed of six gold aluminum uprights forming five bays/sections with the five original, re...

Quarter-inch aluminum plate, brushed and anodized. Three bays. Inset bolted U-channel mount on custom-bent steel Z-clips. A narrower configuration of the G shelf family, proportione...

Quarter-inch aluminum plate, digitally cut and hand-finished. Two bays at console depth — deeper than the standard G shelf to accommodate larger objects, books at multiple orientatio...

The Chuck Clothes modular hanging system adds flexible storage to your home. The T-slot track allow pegs to slide and twist-lock anywhere on the board. M...

Please note the price is calculated for a set of (4 lines + 18 rulers) as in the images. Cover curtain, a spatial room divider meets a bookshelf. Showcasing your favorite book covers as a rhythmic mood board in space. Cover curtain works as an instrument with endless possibilities. Created small bookshelf...

Aluminum Trio Bottle Bracket by Henry Wilson Dimensions: W 23.5 x D 7.1 x H 5.7 cm Materials: Aluminum. Available in Solo, Duo, or Trio versions. Available in three configurations,...

Evoking associations with minimal art, the wall-mounted shelf profil by Jörg Schellmann bears a distinct sculptural appeal. The aluminum shelf is produ...

The Eos Shelf, designed by Giuseppe Bavuso, is an innovative wall shelving system. With a thickness of only 8 mm, the Eos design combines a lacquered glass top with a lacquered alumi...

NASA Colonna shelf by Daniel Nikolovski Dimensions: ø39 x H 120 cm Materials: Aluminum, Colored Glass NASA Colonna is a circular shelf that is comp...

Quarter-inch aluminum plate throughout. Custom integrated hinge concealed within the door thickness —no visible hardware on the face. The sideboard configuration extends the cabinet...

Aluminum Duo Bottle Bracket by Henry Wilson Dimensions: W 15 x D 7 x H 6 cm Materials: Aluminum. Available in Solo, Duo, or Trio versions. Available in three configurations, the Bo...

Piazzetta shelf, light grey by Atelier Ferraro Dimensions: L33 x W10 x H14 cm Materials: Recycled Aluminium Also Available: Cement Greyand Pebble Grey colors „THE FORM FOLLOW...

Piazzetta shelf, pebble grey by Atelier Ferraro Dimensions: L35 x W13 x H12 cm Materials: recycled aluminium Also available: cement grey and light grey colors. „The Form Follows Th...

The Dedicato Bookshelf by Ligne Roset, designed by Didier Gomez, is a striking piece that effortlessly combines modern design with functional elegance. This bookshelf features a slee...

Bookcase unit to be horizontally or vertically positioned. Shelves in aluminium varnished folded sheet metal. Back panel in teak wood. Designed by Giuseppe Vigano for Tisettanta ...

German designer Jörg Schellmann forgoes the conventions of interior furniture design and instead creates robust pieces that would seem more at home in industrial or commercial spaces...

Piazzetta shelf, cement grey by Atelier Ferraro Dimensions: L 33 x W 10 x H 14 cm Materials: recycled aluminium Also available: light grey and pebble grey colors. "The form f...

Kai Kristiansens simple wall unit in darkened oak featuring (in cm) o 1 Desk - Depth 41 o Art book display - Depth 32 o Universal display - Depth 29,5 Shelves o 2 XL - Depth 29 ...

An open, wall-mounted shelf designed for the storage and display of everyday objects. Crafted from thick raw aluminium plate and solid oak brackets, its form references early 20th ce...

The wall-mounted, tidal shelf is formed out of 1/4 inch thick, powder-coated aluminum. Each shelf has a welded U-channel to the reverse of the shelf and ea...

An open, wall-mounted shelf designed for the storage and display of everyday objects. Crafted from raw aluminum plate and breech wood brackets with water-based charcoal black wood st...

French Chasse Inspired Towel and Soap Rack Just the thing for the smallest room in the house, made in aluminium and embossed with a French Hunting Dog scene The rack fits on the wa...

The Minimalist wall-mounted 4G shelf is sculpted out of 1/4 inch thick, brushed and anodized. Each shelf has an inset bolted U-channel that spans the length o...

Quarter-inch aluminum plate, brushed and anodized. Six bays. Inset bolted U-channel mount on custom- bent steel Z-clips. The widest standard configuration in the G shelf family. Six...