Plywood Lounge Chairs

Ingmar Relling Siesta Leather Longue Chair for Westnofa 1970s

Giampiero Vitelli for Rossi di Albizzate, pair of 'Minore' lounge chairs, leather, plywood, Italy, 1961 A truly magnificent piece that scores highly on every design aspect: executio...

Iconic Plycraft Mr. style lounge chair and ottoman, executed in bent plywood, vinyl faux leather, chrome and steel. The chair swivels and tilts on its center pole support, which is ...

A Scandinavian style recliner or adjustable lounge and ottoman by Ekornes, their Stressless brand. With teak-plywood wood bases and metal frames and genuine leather upholstery, this is a comfortable brown color leather recliner on a round teak-plywood base that swivels 360 degrees. Ottoman is upholstered in same brown leather and teak-plywood base as recliner. Signed in many locations on the chair and ottoman. Made in Norway, in the late 20th Century. A very comfortable chair and ottoman...

Inspired by the sculptural forms, Frame Lounge Chair is a seating piece with a wider and lower design that presents a cocoon feeling to the person who sinks into it. With the idea of...

A plywood, brass and red fabric lounge chair designed by Gianfranco Frattini and produced by Cassina, Italy, c. 1950s. Wood has recently been refinished. Pre restoration images avai...

Manufactured by Duba Møbelindustri, pair of armchairs, bent plywood, chrome-plated metal, fabric, Denmark, 1970s. Pair of Danish chairs manufactured by Duba Møbelindustri. The whol...

2nd Gen Eames lounge chair with ottoman fully restored. New shock mounts, reupholstered cushion in pine green full grain leather, and refinished shells, re-polished steel frame.

The Trama collection was created around the concept of tress. Started in 2014 today it has a variety of pieces with different typologies . Trama Lounge Chairs 22 made with fabric an...

Classic Mid Century lounge chair and ottoman designed by Murphy Miller for Plycraft, circa 1950’s. The swivel and tilt chair features bent plywood arms which are attached to the tufted vinyl upholstered seat and backrest. The not often seen ottoman features a fully tufted surface which is supported by the tapering tubular metal four leg base. This example is in good, original condition showing some signs of age and use, specifics to follow. The vinyl upholstery on the seat cushion of the chair has a small flaw, and the upholstery at the top of the side of the back shows minor scuffs. The chair is fully functional and usable as is, or you can have it reupholstered if you prefer a more polished look. In the style of the Mulhauser , and Eames plywood lounge chairs...

Iconic pair of Eames for Herman Miller LCM's in later orange and black paint finish. These chairs are structurally sound and sturdy, both have a later, but not new, orange paint surf...

Eames Lounge Chair (2010 reproduction) Product description Designed in 1956 by Charles and Ray Eames for Herman Miller, the Lounge Chair was conceived to offer "the warmth of a well...

Set of three "Yoga" lounge chairs designed by Erik Magnussen and produced by Kevi, Denmark. Chrome-plated formed tubular steel, painted moulded plywood...

A pair of plywood, brass and red fabric lounge chairs designed by Gianfranco Frattini and produced by Cassina, Italy, c. 1950s. Wood has recently been refinished. Vintage fabric in...

Iconic Penguin lounge chair, made by Kofod - Larsen, distributed by Selig. The chair features a wrought iron frame, newly upholstered pad seat ( Boucle ) and a sculpted plywood backr...

In a world of over-restored Eames lounge chairs we are offering a special patinated example of the iconic model 670 and 671 chair and ottoman. This duo has been strategically restore...

Prominent grain 3rd Gen Eames lounge chair with ottoman fully restored. New shock mounts, restored original leather and oiled shells, re-polished steel frame.

The Trama collection was created around the concept of tress. Started in 2014 today it has a variety of pieces with different typologies . Trama Lounge Chairs 22 made with fabric an...

We love these lacquered plywood chairs from the designdom of 1980s Italy. For the new custom cushions, we chose colorful, handwoven cashmere throws from Gabriela Hearst. The Gabriela...

The Trama collection was created around the concept of tress. Started in 2014 today it has a variety of pieces with different typologies . Trama Lounge Chairs 22 made with leather a...

Giampiero Vitelli for Rossi di Albizzate, 'Minore' easy chair, leather, plywood, wood, Italy, 1961 A truly magnificent piece that scores highly on every design aspect: execution, ma...

Tendo Mokko has long used outside furniture designers, which is unusual for Japanese manufacturers, and some of its products have been on sale for nearly half a century. The technolo...

What if furniture could be as soft and inviting as freshly baked pastries—ravioli, homemade pasta, or buttery croissants? Inspired by a cooking TV show, designer Dmitry Kozinenko env...

Iconic Charles & Ray Eames LCW lounge chair in Birch plywood. Early Herman Miller production from the fifties (5-2-4 screw configuration), just after Herman Miller took over producti...

Rare 1960s chairs by Osvaldo Borsani. Meticulously restored to bring out the chairs' beauty, while preserving the desirable patina and evidence of age. Doubled steel legs, teak venee...

This is a rare example of the Model 4331 lounge chair designed by Pierre Paulin for Thonet. Chair features a plywood frame with black enamel finish, fresh white boucle upholstery, t...

Beautiful, iconic lounge chair named Bratislava after a capital of Slovakia. This lounge chair was produced by Drevopodnik Holesov in 1960s and was designed by Jindrich Volak. The Ho...

This lounge chair, made of mahogany plywood, faux leather, and metal in Italy during the 1950s, embodies an exquisite form made possible by the inherent quality of the plywood, resul...

Inspired by the sculptural forms, Frame Lounge Chair is a seating piece with a wider and lower design that presents a cocoon feeling to the person who sinks into it. With the idea of...

When Hans J. Wegner designed this chair in 1963 it was a little too radical for the public and it was sold in very low numbers, and because of this when the world became aware of the...

1st generation LCW lounge chair designed by Charles and Ray Eames Produced by Evans Plywood Products circa 1948-49 Molded Ash plywood in black finish Remarkable condition with 5-2-5...

A most recognizable piece of Mid-Century Modern furniture, the Eames Lounge Chair w/ Ottoman was conceived/crafted by Charles and Ray Eames and remains one of the most significant an...

A masterpiece of mid-century Scandinavian design, the iconic "Siesta" lounge chair was designed in 1965 by acclaimed Norwegian designer Ingmar Relling (1920–2002) for Westnofa — one ...

Oscar Niemeyer and Ana Maria Niemeyer (attributed) Chaise Longue, c. 1970 86 x 176 x 61 cm 33 43/50 x 69 7/25 x 24 1/50 in Attributed to celebrated Brazilian architect Oscar Niemeye...

This is an original Eames Lounge Chair and Ottoman, models 670 and 671, designed by Charles and Ray Eames in 1956. This set dates to circa 1970 and has Brazilian rosewood shells.

Beautiful Pair of Mid Century Scandinavian modern Red faded worn Leather Narrow lounge chairs. Designed by Erik Jørgensen. Has curved blonde birch plywood shell and birch legs. Leath...

Armchair structure base in cast aluminium. Seat, backrest are in plywood with exteriors in walnut nature effect NG EN2 Upholstered in Aged camel V18 Various fabrics and leathe...

a Circa 1970 manufactured Minimalist Space Age Lounge Chair After stripping off the old fabric we saw some of the original foam went very brittle by usage and we had to restore the...

A sculptural lounge armchair that earns its place in any serious interior. Bold in form, refined in execution — and made entirely to order in your choice of fabric, color, and finish...

Early LCW (Lounge Chair Wood) designed by Charles and Ray Eames and manufactured by Evans Products Company for Herman Miller, United States, circa 1947–1949. An authentic early-prod...

Experience Elegance Redefined: The Ultimate Mid-Century Modern Lounge Chair Step into a world of luxury and timeless design with this breathtaking mid-century modern lounge chair. A...

Two vintage sculptural David Kawecki puzzle chairs made of birch plywood, circa 1990s. 30" x 24" x 32" x 18.5 "David Kawecki is a designer who c...

The Lounge Chair and Ottoman is an iconic furniture design created by Charles and Ray Eames. It is widely regarded as one of the most significant and enduring pieces of modern furnit...

Pair of easy chairs having a sleek, streamlined design of beautifully clever simplicity made for the modern British home, circa 1960. In bent plywood featuring continuous one piece a...

Exclusive and rare lounge set designed by Illum Wikkelsø, consisting of two “Apollo” lounge chairs and a matching ottoman. Produced by Ryesberg Møbler in Denmark in the 1970s, this s...

Piegatto Designed the Soave Chair / #soavechair in 2018 and was registered in 2019. This chair was presented in a temple in Japan in 2019. A chair with feelings waving hi or goodb...

The contemporary Cowrie chair is inspired by the organic concave lines of sea shells. Featured in Taschen's 1000 Chairs, the iconic design has a curvilinear form which is the result ...

DCW by Charles and Ray Eames for Herman Miller in original condition. Legs attached with 5/2/4 screw configuration. Original patina.

Armchair structure base in cast aluminium. Footstool structure base in tubular steel and painted. Seat, backrest and footstool are in plywood with exteriors in walnut nature effect ...

This is an important "Cushion" Lounge Chair, executed by George Nakashima Studio in New Hope, Pennsylvania c. 1952. The chair's frame is made of American Black Walnut with hand-shave...

Armchair designed by Jaime Hayon in 2010. Manufactured by BD in Spain. It has an elegance carried throughout the series, the comfort that this typology requires in an armchair an...

Móveis Cimo, lounge chair, laminated wood, Brazil, 1940s Well-sculpted Brazilian lounge chair that deserves a prominent place in one's interior. The construction is based on rounded...

A stunning pair 1960s lounge chairs by Murphy Miller. Button tufted upholstery, these gently used swivel lounge chairs boasts winged walnut armrests and original vinyl upholstery. Ni...

A pair of plywood and solid wood lounge chairs or slipper chairs, designed and produced in Italy, c. 1960s 14.75" seat height

Inspired by the sculptural forms, Frame Lounge Chair is a seating piece with a wider and lower design that presents a cocoon feeling to the person who sinks into it. With the idea of...

The Eames LCM (Lounge Chair Metal) features sheets of premium face veneer on both sides of the seat and back. The wide variety of wood available adds to the versatility and beauty of...

Other Specifications: -Seating Height: 15.6" -Chair made of 32 Laminated Plywood Birch sections from Nordic Forests. -Weight Capacity: 350 pounds. -Usage: Indoors. Outdoor use on...

The famous Paimio lounge chair model 41, designed by Alvar Aalto for the Paimion Parantola. Manufactured by Artek in the 1960s, stamped "Artek, Aal...

Discover the timeless elegance of Ilmari Tapiovaara's 1950s Wilhelmina chairs by Laukaan Puu. Crafted with unparalleled Scandinavian craftsmanship, these vintage treasures merge func...

Charles Eames lounge chair for Herman Miller, c.1950's, USA. The design features a wide low seated bent plywood chair. This Lounge Chair Wood (LCW), is part of the Plywood Group seri...