Skip to main content
Video Loading
Want more images or videos?
Request additional images or videos from the seller
1 of 10

Smooth White Bronze Half Moon Console Table – Louise, Paul Mathieu

$4,457per item
£3,371.88per item
€3,940.66per item
CA$6,378.92per item
A$6,481.52per item
CHF 3,671.94per item
MX$78,864.16per item
NOK 43,056.95per item
SEK 43,291.53per item
DKK 29,478.40per item
Quantity

About the Item

The Louise Demi Console Table in Smooth White Bronze is a half-moon table: 31 inches wide, 15.5 inches deep, 30 inches tall, three cabriole legs, and a top that is curved at the front and flat at the back wall edge. All surfaces are clad in Smooth White Bronze including the flat back. The centre cabriole leg sits below the apex of the curve; the two outer legs are at the rear corners. The serpentine apron follows the curved front profile. The teak structure is built before Smooth White Bronze metal is pattern-cut and fitted by hand to every surface. The three cabriole legs are each covered in Smooth White Bronze on the S-curve without visible join. The curved top, apron, and flat back edge are all individually fitted and secured with flush-set nails. Measures 31 by 15.5 by 30 inches. Works as a hall table, entry console, or wall-mounted demi-lune accent piece. Available in all twelve standard finishes. Custom sizing available. Made entirely to order. Designed by Paul Mathieu for Stephanie Odegard Collection. Paul Mathieu named the Louise series for his feminine interpretation of Louis XV furniture. The Demi Console Table applies that interpretation to the demi-lune, a form the French tradition has used as a wall console since the same Louis XV period. Produced in Udaipur. Made to order, each piece may show slight variations that are a natural result of handmade metal-clad production. The Smooth White Bronze surface will gradually mellow in tone over time, which is part of the material's natural character. The images shown in this listing may be photographed in different lighting conditions or may include 3D illustrations created to represent the available finishes. We warmly encourage customers to request an individual sample or a complete sample set of all twelve finishes to experience the surface, tone, and character firsthand. Please note that moisture in the air, seasonal climate shifts, and the natural movement of wood over time may cause the metal surface to develop slight wrinkles or occasional bubbling. We use well-seasoned reclaimed teak and high-quality marine-grade MDF wherever technically possible to minimise these natural effects, but complete stability of metal cannot be guaranteed. All smooth finishes will show subtle tool marks. These are not defects but a natural and unavoidable result of hand-working and hand-polishing metal sheets. Our hammered finishes are recommended where a more textured, forgiving surface is preferred. None of our metal-clad pieces are sealed with a permanent protective coating. This allows the metal to age naturally and beautifully over time. We polish every piece carefully before packing. A clear PU coat can be applied on request. The antiqued white bronze finish will react with natural elements the fastest in the beginning, but it too will stop reacting and settle into a stable state like copper after 6-12 months. Since it is already antiqued and looks intentionally tarnished, this early reaction does not change the overall appearance. In that way, this surface is the most forgiving. The antiqued white bronze finish is done by applying an acidic chemical over the white bronze to recreate a natural patination. Like the aging of silver, copper, or brass, the final result and colour uniformity cannot be guaranteed. The goal of this finish is to achieve rainbow-like tones with dull, shiny, cloudy, and lightly streaked patches to give an illusion of antiquing. As a default practice, we offer a protective wipe-on PU coat only on this finish. If a designer prefers the natural, uncoated aging, we can leave it untreated just like the other finishes. A PU coat helps keep the surface looking the same as when shipped, but it does not create a fully uniform patina; natural variation will always remain part of this finish.
  • Creator:
  • Dimensions:
    Height: 30 in (76.2 cm)Width: 31 in (78.74 cm)Depth: 15.5 in (39.37 cm)
  • Style:
    Modern (Of the Period)
  • Materials and Techniques:
  • Place of Origin:
  • Period:
  • Date of Manufacture:
    2025
  • Production Type:
    New & Custom(Current Production)
  • Estimated Production Time:
    11-12 weeks
  • Condition:
  • Seller Location:
    New York, NY
  • Reference Number:
    Seller: LDCT-WB-SM-0041stDibs: LU4236149998692

More From This Seller

View All
Smooth White Bronze Demi Lune Console Table – Louise Cabriole Leg

Smooth White Bronze Demi Lune Console Table – Louise Cabriole Leg

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth White Bronze has a half-moon top, flat at the back and curved at the front, on three cabriole legs in Smooth White Bronze metal. The flat back...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Silver, Sheet Metal

Smooth White Bronze Louise Demi Console – Half Moon Entry Table

Smooth White Bronze Louise Demi Console – Half Moon Entry Table

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth White Bronze is a half-moon entry table: three cabriole legs, a curved front edge, a flat back that sits against the wall. All surfaces clad i...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Silver, Sheet Metal

Smooth White Bronze Demi Console Table – Louise Cabriole Leg

Smooth White Bronze Demi Console Table – Louise Cabriole Leg

By Paul Mathieu (French)

Located in New York, NY

Three cabriole legs in Smooth White Bronze metal carry a half-moon top at 30 inches. The flat back edge of the Louise Demi Console Table sits flush against the wall; the curved front...

Category

21st Century and Contemporary Indian Modern Console Tables

Materials

Silver, Sheet Metal

Smooth White Bronze Half Moon Entry Table – Louise Demi Console

Smooth White Bronze Half Moon Entry Table – Louise Demi Console

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth White Bronze has a half-moon top on three cabriole legs, the flat back sitting against the wall, the curved front projecting 15.5 inches into ...

Category

21st Century and Contemporary Indian Hollywood Regency Console Tables

Materials

Silver, Sheet Metal

Smooth White Bronze Demi Console Table – Louise Half Moon, Paul Mathieu

Smooth White Bronze Demi Console Table – Louise Half Moon, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table in Smooth White Bronze is a demi-lune wall table designed by Paul Mathieu: half-moon top, three cabriole legs in Smooth White Bronze metal, serpentine a...

Category

21st Century and Contemporary Indian Louis XV Console Tables

Materials

Silver, Sheet Metal

Smooth White Bronze Louise Demi Console Table – Half Moon, Paul Mathieu

Smooth White Bronze Louise Demi Console Table – Half Moon, Paul Mathieu

By Paul Mathieu (French)

Located in New York, NY

The Louise Demi Console Table has a half-moon top: a flat edge at the back that sits flush against the wall, and a curved front edge that projects into the room. Three cabriole legs ...

Category

21st Century and Contemporary Indian Louis XV Console Tables

Materials

Silver, Sheet Metal

You May Also Like

Console Table in Leather and Stainless Steel, probably Italy, 2000s

Console Table in Leather and Stainless Steel, probably Italy, 2000s

Located in Greding, DE

Long rectangular console table on straight stainless steel legs with decorative profiling. The top is covered in beige leather with a refined stitched edge.

Category

Early 2000s Italian Modern Console Tables

Materials

Stainless Steel

Stunning Silver Leaf Console Table Designed by Tony Duquette

Stunning Silver Leaf Console Table Designed by Tony Duquette

By Tony Duquette, Baker Furniture Company

Located in New York, NY

Stunning Biomorphic silver leaf console designed by Tony Duquette, reissued in a limited amount by Baker furniture company. The console was originally designed for the Charles and ...

Category

Early 2000s American Modern Console Tables

Materials

Silver Leaf

French Mid-Century Steel and Bronze Console Table with White Veined Marble Top

French Mid-Century Steel and Bronze Console Table with White Veined Marble Top

Located in Atlanta, GA

A French steel and bronze console table from the mid 20th century, with marble top and rosette medallion. Created in France during the mid-century period, this console table features...

Category

Mid-20th Century French Mid-Century Modern Console Tables

Materials

Marble, Bronze, Steel

Sculptural, Aluminum, "Classic Fusion" Console, Parisii Collection

Sculptural, Aluminum, "Classic Fusion" Console, Parisii Collection

By Studio Parisien

Located in Del Mar, CA

CLASSIC FUSION CONSOLE TABLE Antiquity reinterpreted through modern suspension The Classic Fusion Console Table is a sculptural dialogue between past and present. Its cast metal le...

Category

21st Century and Contemporary Mexican American Classical Tables

Materials

Stone, Metal, Aluminum

Large 37"h Silvered Patinated Lacquered Welded Steel Heavy Console Table MINT

Large 37"h Silvered Patinated Lacquered Welded Steel Heavy Console Table MINT

By Brueton, Pace Collection

Located in Rockaway, NJ

Large Custom Studio Design 37"h Silvered Patinated Lacquered Welded Steel Heavy Console Table MINT!

Category

20th Century American Mid-Century Modern Console Tables

Materials

Steel